Ford automatic transmission C3 repair manuals - is a part of Ford repair manuals: Manual and Atomatic Transmissions. This part contains the detailed description of works and all wiring diagrams for Ford and Mercury automatic transmission C3.
Vehicle Application:
Applications (US)
1974–1980 Ford Pinto
1974–1977 Mercury Capri
1978–1983 Ford Fairmont
1970–1986 Ford Mustang
1981–1982 Ford Granada
1974–1986 Smaller rear wheel drive Lincolns
1974–1980 Mercury Bobcat
1978–1983 Mercury Zephyr
1979–1986 Mercury Capri
1983–1986 Mercury Marquis/Ford LTD (when equipped with the 2.3 I4)
1985–1989 Merkur XR4Ti
1983-1989 Thunderbird
Applications (EU)
1972–1985 Ford Granada
1972–1975 Ford Consul
1982–1987 Ford Sierra
1979–1987 Ford Capri
1974–1982 Ford Cortina
1976–1982 Ford Taunus
1970–1980 Ford Escort Mk1 and Mk2
Description
The Ford automatic transmission C3 is a three-speed unit capable of providing automatic upshifts and downshifts through three forward gear ratios. It also provides manual selection of first and second gears. The transmission consists of a torque converter, planetary gear train, two multiple disc clutches, a one-way clutch and a hydraulic control system.
Adjustments
Band, Intermediate
1. Remove the downshift rod from the transmission downshift lever.
2. Clean all dirt from the band adjusting screw area. Remove and discard the locknut.
3. Install a new locknut on the adjusting screw. Using Band Adjustment Torque Wrench Set T71P-77370- A or equivalent, tighten adjusting screw until tool handle clicks. The tool is a preset torque wrench that clicks and breaks when torque on the adjusting screw reaches 14 N·m (10 Ib·ft).
4. Back off the adjusting screw exactly two turns.
5. Hold the adjusting screw from turning and tighten the locknut to 48-61 N·m (35-45 Ib·ft).
6. Install the downshift rod on the transmission downshift lever.
from Ford repair manuals
